Hélice bipale repliable Composite Saildrive 14''

On sale!

Product Details

Product Details

Reference U1409LH

Data sheet

Weight

In the same category

copy of 4P FOF propeller - 22 '' - 560 mm x (15-16-17-18-19)

€5,872.01

On sale!

PSS rotary joints shaft Ø 45 tube Ø 64-76-89 mm

€749.70

3P FOF propeller - 20 '' '- 505 mm x (12,13,14,15,16,17,18)

€2,652.00

Three-bladed propellers, shaft line. Flexofold manufactures high-performance folding and two-bladed propellers to match and exceed the performance of fixed propellers. A sailboat propeller must convert the engine power into thrust as efficient in forward as in reverse and have a minimum drag to sail faster under sail. ATMB Marine provides advice and recommendations for Flexofold propellers according to applications. A form for calculation and definition is available on our website. Flexofold propellers are designed according to the following specifications: Do not generate noise or vibration. Be reliable and reasonably priced. Must not hang ropes and drifting objects. Need little maintenance. Be made with quality materials. Flexofold propellers have proven themselves in terms of efficiency

On sale!

ATMB Marine

Stainless steel shaft Ø 40 length 2000 mm

€762.34

The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25

Polyflex

5 '' polyflex support - ZF 127x108x63.5

€313.66

Motor supports made of "polyflex" polymer are a simple and effective alternative to replacing conventional motor supports. Their advantages are numerous: extremely solid and efficient. Their lifespan is prolonged, because insensitive to corrosion and resistant to hydrocarbons. Isolate the engine from the hull. Improve soundproofing. They completely fulfill their roles as silent blocks to obtain sufficient vertical deflection, a good level of insulation, combined with a minimum of lateral deflection under the thrust in propulsion and the loads consecutive to the sailing conditions

Flexofold

3P FOF propeller - 24 '' - 610 mm x (13,14,15,16,17,18)

€4,920.00

On sale!

ATMB Marine

Stainless steel shaft Ø 45 length 2000 mm

€948.64

ATMB Marine

Hydrocarbon fuel hose inner Ø 8 x 17 mm

€8.31

Flexofold

3P FOF propeller - 16 '' - 405 mm x (10,11,12,13,14)

€2,452.56

ATMB Marine

Rotating joints VRM / I 30 x 46

€99.91

Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector

Eliche Radice

Two-bladed propeller rep. Sail Drive Ø 380 mm - 15 "(Pitch 8 to 12)

€1,157.31

Aquadrive

Stop B20 / CV21 for shaft Ø 40 to 50 mm

€3,072.69

For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili