

ATMB Marine
Rotating joints VRM 40 x 65
Availability:
Reference: VRM34065
€83.10
Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
Download
Download the notice
Product notice
Download (833.86k)In the same category
ATMB Marine
Rotating joints VRM / I 30 x 46
€72.59
Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
ATMB Marine
Rotating joints VRM / I 22 x 46
€72.59
Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
ATMB Marine
Rotating joints VRM 35 x 65
€83.10
Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
ATMB Marine
Rotating joints VRM / I 25 x 46
€72.59
Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent

Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent