RACOR 120AP prefilter

Description
Product Details

The RACOR range is renowned for its fuel pre-filtration qualities. The filters contain patented "Aquabloc" elements which provide a pre-filtration of 30 microns and a separation of 100% of the water contained in the diesel. The 500-900-1000 models centrifuge diesel to separate water and solid elements. The water droplets are then collected from the bottom of the bowl. The fuel removed from the water is then filtered with the media 30 microns before going to the engine

Product Details

Reference 120AP

Data sheet

Weight: 0,6 kg
height: 166 mm
Inner Diameter: 8 mm

30 micron filter element for 120AP

€40.36

ATMB Marine

Hydrocarbon fuel hose inner Ø 8 x 17 mm

€8.31

In the same category

Aquadrive

CV42 Aquadrive seals - V 270 +/- 24 mm

€6,319.28

For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili

Aquadrive

Bearing kit for stop 20480

€695.57

Eliche Radice

Sail Drive fixed aluminum three-blade propeller Ø 455 mm - 18 "

€632.02

Racor

RACOR 1000FG pre-filter

€582.80

Out of stock

Aquadrive

CV10 adapter - Volvo MS reverse gear

€254.46

Flexofold

Polyaurethane blade stop (1 Pcs)

€22.20

Flexofold

3P FOF propeller - 22 '' - 560 mm x (12,13,14,15,16,17,18)

€3,012.00

Three-bladed propellers, shaft line. Flexofold manufactures high-performance folding and two-bladed propellers to match and exceed the performance of fixed propellers. A sailboat propeller must convert the engine power into thrust as efficient in forward as in reverse and have a minimum drag to sail faster under sail. ATMB Marine provides advice and recommendations for Flexofold propellers according to applications. A form for calculation and definition is available on our website. Flexofold propellers are designed according to the following specifications: Do not generate noise or vibration. Be reliable and reasonably priced. Must not hang ropes and drifting objects. Need little maintenance. Be made with quality materials. Flexofold propellers have proven themselves in terms of efficiency

On sale!

Ultraflex

Push / pull cable type 33C - long. 2.45 m - 8ft

€36.74

ATMB Marine

Braided transparent hose inner Ø 16x22 mm per ml

€2.30

Polyflex

Polyflex coupling Volvo 101x80x60 female

€432.42

The recommendations are given for information only, the final recommendations are confirmed by us because they depend on the choice of the reduction gear and the reduction ratio. The total length of the systems includes the seal, stop, adapter set. The engine mounts can be different depending on the type of gearbox chosen. Modulin series stops are guaranteed for 10 years in pleasure use