RACOR 500FG pre-filter
Related products
ATMB Marine
Hydrocarbon fuel hose inner Ø 8 x 17 mm
Fuel supply and filling pipe and vent standard ISO7840 A2-CE. In NBR rubber reinforced with high tenacity self-extinguishing textile braid. Operating temperature 25 ° + 80 ° C operating pressure: 10 bars. These pipes are suitable for diesel and petrol with or without lead
In the same category
ATMB Marine
Stainless steel shaft Ø 30 length 1500 mm
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
Aquadrive
Stop B10 / CV05 for shaft Ø 22 to 30 mm
For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili
Eliche Radice
Fixed two-bladed propeller Ø 355 mm - 14 "- (Pitch 11 to 17)
Eliche Radice
Fixed propeller 4 blades B Ø 480 mm - 19 "- (Pitch 15 to 19)
ATMB Marine
Stainless steel shaft Ø 30 length 2000 mm
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
Eliche Radice
Fixed propeller 4 blades S Ø 560 mm - 22 "- (Pitch 18 to 30)
Eliche Radice
Sail Drive fixed aluminum three-blade propeller Ø 430 mm - 17 "
ATMB Marine
Water hose inside Ø 32 x 37 mm per ml
Smooth PVC pipe with food-grade metal turns. For on-board water circuit and engine cooling supply and bilge pumps. This hose is very flexible and robust. It is made of translucent or white PVC with a metallic coil. Service temperature -10 to + 60 ° C. Operating pressure 10 bar
Polyflex
TD / ZF polyflex coupling 121x98.5x63.5
Polyflex
Polyflex support TD / ZF 121x98.5x63.5
Flexofold
copy of 4P FOF propeller - 22 '' - 560 mm x (15-16-17-18-19)
Flexofold propellers 4 folding blades. Flexofold Cruising Quadripale, this version is intended for large sailboats and catamarans it provides the same thrust as the fixed propellers while eliminating drag. They are available in 22 "/ 560mm or 24" / 610mm
- On sale!