RACOR 900FG prefilter

Description
Product Details

The RACOR range is renowned for its fuel pre-filtration qualities. The filters contain patented "Aquabloc" elements which provide a pre-filtration of 30 microns and a separation of 100% of the water contained in the diesel. The 500-900-1000 models centrifuge diesel to separate water and solid elements. The water droplets are then collected from the bottom of the bowl. The fuel removed from the water is then filtered with the media 30 microns before going to the engine

Product Details

Reference 900FG

Data sheet

Weight: 3 Kg
height: 432 mm
Inner Diameter: 10 mm

Filter element 30 microns for 900FG

€27.48

ATMB Marine

Hydrocarbon fuel hose inner Ø 8 x 17 mm

€6.92

ATMB Marine

Hydrocarbon fuel hose inner Ø 10 x 19 mm

€9.90

In the same category

ATMB Marine

Elastomer Shoulder Ring Ø 22 mm x 29 x 100

€13.24

ATMB Marine

2 "valve Ø 51 mm for 45-45-50 mm

€18.97

Eliche Radice

Fixed twin-blade propeller Sail Drive Ø 430 mm - 17 "

€415.80

ATMB Marine

Phenolic Resin hydrolube ring 25 x 38.1 x 101.6

€37.30

Eliche Radice

Fixed two-bladed propeller Ø 380 mm - 15 "- (Pitch 13 to 17)

€597.09

Three-bladed propeller for shaft line 55% coverage area. The propellers of our production are made with care in shell molds. This allows to obtain homogeneous thicknesses and a strict similarity of execution. Automated machining guarantees precise assembly. All of our propellers are dynamically balanced to ensure vibration-free operation. Our propellers guarantee the best performance of the engine as well as a very good longevity

ATMB Marine

PSS rotary joints shaft Ø 60 tube Ø 89-95-102 mm

€848.40

Aquadrive

Stop B20 / CV21 for shaft Ø 40 to 50 mm

€2,560.57

For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili

Ultraflex

Push / pull cable type 33C - long. 6.10 m - 20ft

€45.70

Eliche Radice

Fixed propeller 4 blades S Ø 530 mm - 21 "- (Pitch 18 to 30)

€1,765.21

4 blades propeller type S 75% surface. The propellers of our production are made with care in shell molds. This allows to obtain homogeneous thicknesses and a strict similarity of execution. Automated machining guarantees precise assembly. All of our propellers are dynamically balanced to ensure vibration-free operation. Our propellers guarantee the best performance of the engine as well as a very good longevity

ATMB Marine

Stainless steel shaft Ø 40 length 2000 mm

€635.29

The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25