- On sale!
In the same category
Smooth PVC pipe with food-grade metal turns. For on-board water circuit and engine cooling supply and bilge pumps. This hose is very flexible and robust. It is made of translucent or white PVC with a metallic coil. Service temperature -10 to + 60 ° C. Operating pressure 10 bar
Aluminum Sail Drive SD2 two-bladed propellers. Propellers made with an aluminum / magnesium alloy, coated with epoxy paint. They have a rubber shock absorber hub. They are intended for sailboats, catamarans, displacement hulls
Bronze twin blade propeller for shaft line 33% coverage area. The propellers of our production are made with care in shell molds. This allows to obtain homogeneous thicknesses and a strict similarity of execution. Automated machining guarantees precise assembly. All of our propellers are dynamically balanced to ensure vibration-free operation. Our propellers guarantee the best performance of the engine as well as a very good longevity
Motor supports made of "polyflex" polymer are a simple and effective alternative to replacing conventional motor supports. Their advantages are numerous: extremely solid and efficient. Their lifespan is prolonged, because insensitive to corrosion and resistant to hydrocarbons. Isolate the engine from the hull. Improve soundproofing. They completely fulfill their roles as silent blocks to obtain sufficient vertical deflection, a good level of insulation, combined with a minimum of lateral deflection under the thrust in propulsion and the loads consecutive to the sailing conditions
For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
Bronze twin blade propeller for shaft line 50% coverage area. The propellers of our production are made with care in shell molds. This allows to obtain homogeneous thicknesses and a strict similarity of execution. Automated machining guarantees precise assembly. All of our propellers are dynamically balanced to ensure vibration-free operation. Our propellers guarantee the best performance of the engine as well as a very good longevity
These outputs are available from diameter 40 to 152 mm. They are made of 316L stainless steel with passive welds. They are designed to receive optional valves. Also available in an angled version
The Rupture Seal comes from a patented American technology. It allows very quickly to seal breaches of different sizes caused to the shell. Deployment is simple and fast, from the inside, it provides an effective seal that will allow you to return quickly to the port in complete safety.
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.