copy of Hélice bipale repliable Composite Saildrive 14''
In the same category
ATMB Marine
Exhaust pipe Ø 152 x 165 mm
Special exhaust pipe. This hose is very flexible to facilitate mounting, the radius of curvature is 2.5 times in diameter. Hydrocarbon-resistant black SBR tube, synthetic pleats and embedded steel frame. Service temperature -30 to + 100 ° C. Operating pressure 3 bar
ATMB Marine
PSS rotary joints shaft Ø 40 tube Ø 64-76-89 mm
Eliche Radice
Fixed folding twin-blade propeller Ø 430 mm - 17 "- (Pitch 9 to 13)
Eliche Radice
Fixed propeller 4 blades S Ø 455 mm - 18 "- (Pitch 16 to 27)
ATMB Marine
Tube à stratifier Epoxy pour arbre Ø 50 - 55
Flexofold
3P FOF propeller - 18 '' - 455 mm x (11,12,13,14,15,16)
Three-bladed propellers, shaft line. Flexofold manufactures high-performance folding and two-bladed propellers to match and exceed the performance of fixed propellers. A sailboat propeller must convert the engine power into thrust as efficient in forward as in reverse and have a minimum drag to sail faster under sail. ATMB Marine provides advice and recommendations for Flexofold propellers according to applications. A form for calculation and definition is available on our website. Flexofold propellers are designed according to the following specifications: Do not generate noise or vibration. Be reliable and reasonably priced. Must not hang ropes and drifting objects. Need little maintenance. Be made with quality materials. Flexofold propellers have proven themselves in terms of efficiency
ATMB Marine
Water hose inside Ø 35 x 40 mm per ml
ATMB Marine
Shaft seal 25 x 42 and 25 x 40
RMT seals are simple and innovative, they are designed to replace traditional cable glands. They are made of low friction elastomers
ATMB Marine
Exhaust pipe Ø 45 x 55 mm
ATMB Marine
2 "valve Ø 51 mm for 45-45-50 mm
ATMB Marine
Tube à stratifier Epoxy pour arbre Ø 35 - 40
Eliche Radice
Shell cone kit / Sail frive aluminum propeller tightening
Aluminum Sail Drive SD3 three-bladed propellers. Propellers made with an aluminum / magnesium alloy, coated with epoxy paint. They have a rubber shock absorber hub. They are intended for sailboats, catamarans, displacement hulls