

ATMB Marine
Stainless steel shaft Ø 35 length 2000 mm
Availability:
Reference: LA35200
€385.78
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
Related products
ATMB Marine
Elastomer Shoulder Ring Ø 35 mm x 54 x 140
€16.50
Premium quality elastomeric hydrolubes ring
ATMB Marine
Phenolic Resin hydrolube ring 35 x 47.62 x 139.7
€46.80
Outer hydrolube ring in bonded elastomeric resin
ATMB Marine
Brass hydrolube ring 35 x 47.62 x 139.7 mm
€90.93
Outer hydrolube ring in brass, elastomer bonded
ATMB Marine
Tube à stratifier Epoxy pour arbre Ø 30 - 35
€105.61
The tubes are reinforced with cylindrical woven fiberglass. They are ready for stratification. Supplied with hydrolubic elastomer rings. We can supply on demand bronze tubes to be laminated to measure with entry and exit of stern and braided cable gland. Consult us
ATMB Marine
Shaft seal 35 x 54 and 35 x 48
€128.73
RMT seals are simple and innovative, they are designed to replace traditional cable glands. They are made of low friction elastomers
ATMB Marine
Rotating joints VRM 35 x 65
€83.10
Sealing is ensured by a pressure lip against a polished stainless steel disc secured to the shaft. A water injector provides lubrication or venting. Hydrophilic nitrile neoprene blend. The VRMI / 22/25/30 models are fitted with a water injector. Models 35 and 40 do not have an injector
In the same category
ATMB Marine
Stainless steel shaft Ø 45 length 2000 mm
€615.54
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Stainless steel shaft Ø 22 length 1500 mm
€175.81
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Phenolic Resin hydrolube ring 50 x 66.67 x 203.2
€67.79
Outer hydrolube ring in bonded elastomeric resin
ATMB Marine
Stainless steel shaft Ø 40 length 2500 mm
€602.06
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Elastomer Shoulder Ring Ø 22 mm x 40 x 105
€13.24
Premium quality elastomeric hydrolubes ring
ATMB Marine
Stainless steel shaft Ø 45 length 3000 mm
€889.36
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Stainless steel shaft Ø 25 length 2500 mm
€261.58
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Stainless steel shaft Ø 35 length 1500 mm
€304.26
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Zinc plated clamping plate Yanmar KM2 / 3P Ø 22 to 30
€112.49
Clamping plates in galvanized steel. All models are precision machined and checked. We can supply conical and Mibral / Cupro aluminum alloy versions on request. Female centering instead of male on Volvo chainrings
ATMB Marine
Phenolic Resin hydrolube ring 30 x 44.45 x 127
€41.13
Outer hydrolube ring in bonded elastomeric resin
ATMB Marine
Hydrolube ring Brass 30 x 44.45 x 127 mm
€84.26
Outer hydrolube ring in brass, elastomer bonded
ATMB Marine
Brass hydrolube ring 35 x 47.62 x 139.7 mm
€90.93
Outer hydrolube ring in brass, elastomer bonded
ATMB Marine
Stainless steel shaft Ø 30 length 3000 mm
€406.33
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Elastomer Shoulder Ring Ø 22 mm x 36 x 100
€13.24
Premium quality elastomeric hydrolubes ring
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent

The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent