Exhaust system kit for Wallas XCDUO

Description
Product Details

Exhaust system kit for vehicules. the exhaust system is supplied with 2 x insulated SS flexible hoses and fasteners

Product Details

Reference 4350

Data sheet

poids: 1 Kg
diamètre extérieur: 28/45 mm

Wallas 1300 kerosene heating

€649.17

Wallas heaters are exclusively made for boats. They are built in Finland with résistant materials such as anodized aluminum at 25 microns and stainless steel 316. They are easy to install and are classified among the quietest heaters and those which consumes the least current. Wallas marin has been a pioneer in marine heaters for 30 years and its products have largely proven their efficiency and reliability. Supplied with fixing plate

On sale!

Wallas

Wallas 1800 kerosene heating

€1,300.43

Wallas heaters are exclusively made for boats. They are built in Finland with resistant materials such as anodized aluminum at 25 microns and stainless steel 316. They are easy to install and are classified among the quietest heaters and those which consumes the least current. Wallas marin has been a pioneer in marine heaters for 30 years and its products have largely proven their efficiency and reliability. Supplied with fixing plate, remote control

Wallas

Wallas 2400 kerosene heating

€1,430.27

Wallas

Wallas Diesel Nautic 22GB heater - 2200 W 12 Volts

€1,457.72

Wallas

Wallas Diesel Nautic 30GB heater - 3000 W 12 Volts

€1,491.67

Wallas

Wallas Diesel Air / Water heating 12 V 2000 + 1000 W 12 Volts

€2,100.00

Wallas

Stainless steel extension for fireplace 2460

€81.30

In the same category

Globe Marine Products

6 blades Ø 50.8 - Width. 22.22 - axis 12.7 - Pin

€46.33

The only turbines in the world capable of running 15 minutes dry. The life of turbines is tripled and the risks of breakdowns limited because their composition makes them more resistant to fouling and abrasion due to sand. These patented turbines are made from elastomers which combine the multiple properties of rubbers such as nitrile, viton and neoprene

Rainman

copy of Membrane kit with box 100/140 L / H

€308.34

Speedseal

SPEEDSEAL LIFE pump cover

€116.38

Simplified pump rotor replacement: the rotors of seawater pumps can stop working at any time. Being able to replace them quickly and easily is vital to engine and boat safety. It is often difficult to quickly replace a pump impeller. beyond the difficulty of access, the multiple screws are hard to remove and it is necessary to replace the paper seal etc ... this maneuver is all the more difficult in navigation. Regular monitoring is essential to prevent any deterioration that may occur at the worst time. Quick replacement reduces the risk

Wallas

Stainless steel adapter for sheath diam. 60/75

€20.98

Xylem

Inline pump 12l / min - LVM Nile - 12V

€41.60

LVM manufactures a range of quality submersible pumps in 12 and 24 Volts. Pumps in line or with kits. All pumps accept sea water, fresh water and some fuel oil. The range offers a wide choice of models and different performances depending on the applications. The pumping kit versions are delivered with a flat hose length 4 meters of nitrile quality, 1 jet breeze 4 meters of electric power cable with crocodile-type clips. These pumps share their small diameters and enter the jerry cans to make transfers. They are suitable for a multitude of boat applications as well as on leisure vehicles

Wallas

1302 remote control for Xallas 1300

€50.06

The new electronic control includes an adjustable themostat as well as a single progressive automatic or manual regulation of the power, a backlight by LEDs, a "boost" function for a rapid rise in temperature. A ventilation only function for the summer as well as an automatic stop of the heating if the cabin temperature is too high (Sun Switch)

ATMB Marine

Protective grid for heating W80

€29.87

Gobius

Black water gauge - 1 indication 3/4 full

€231.13

The installation of Gobius is simple, in less than 30 minutes, without drilling the tank, after placing the probes, connection and calibration are done in a few seconds. Each probe emits a wave creating a vibration in the tank, an accelerometer measures the size of the vibration and transmits it to the control unit which determines whether the liquid level is above or below the probe. The precise information is transmitted to the indicator. The range consists of sensors and control units for fuel, water and black water tanks. They can be connected to most indicators like Wema. Kits are supplied complete ready to install