

Racor
RACOR 245R30 pre-filter
Availability:
Reference: 245R30
€230.02
This range is approved by LLOYDS and Bureau Véritas
The RACOR range is renowned for its fuel pre-filtration qualities. The filters contain patented "Aquabloc" elements which provide a pre-filtration of 30 microns and a separation of 100% of the water contained in the diesel. The 500-900-1000 models centrifuge diesel to separate water and solid elements. The water droplets are then collected from the bottom of the bowl. The fuel removed from the water is then filtered with the media 30 microns before going to the engine
Related products
ATMB Marine
Hydrocarbon fuel hose inner Ø 8 x 17 mm
€4.86
Fuel supply and filling pipe and vent standard ISO7840 A2-CE. In NBR rubber reinforced with high tenacity self-extinguishing textile braid. Operating temperature 25 ° + 80 ° C operating pressure: 10 bars. These pipes are suitable for diesel and petrol with or without lead
In the same category
ATMB Marine
Stainless steel shaft Ø 40 length 2500 mm
€623.01
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
Aquadrive
Classic CV21 stop for shaft Ø 35 to 50 mm
€4,649.15
For 30 years Aquadrive has been manufacturing quality transmissions, the advantages of these systems are numerous and obvious. The Aquadrive makes the boat's propulsion smoother, quieter and vibration-free. Engine alignment becomes superfluous. CV joints can receive up to 16 ° angle and the propeller thrust is fully absorbed by the flexible stop on a veranda. An Aquadrive is made up of three parts. They are available for any type of engine from 10 to 1500 horsepower. To accurately determine your Aquadrive, you must provide the following information: Type of boat. Engine power. Maximum engine speed. Inverter reduction ratio. Anticipated angles. Diameter of the propeller shaft. Recreational or bonded use. Average number of hours per year. We have at your disposal a complete brochure detaili
ATMB Marine
Phenolic Resin hydrolube ring 40 x 53.97 x 165.1
€51.04
Outer hydrolube ring in bonded elastomeric resin
Flexofold
Flexofold 2/3 Saildrive stainless steel lock washer
€4.41
Flexofold Tab washer for 2/3 blades saildrive
orig. code #T01k017
ATMB Marine
Brass hydrolube ring 40 x 53.97 x 165.1 mm
€109.40
Outer hydrolube ring in brass, elastomer bonded
Eliche Radice
Fixed twin-blade propeller Sail Drive Ø 430 mm - 17 "
€378.85
Aluminum Sail Drive SD2 two-bladed propellers. Propellers made with an aluminum / magnesium alloy, coated with epoxy paint. They have a rubber shock absorber hub. They are intended for sailboats, catamarans, displacement hulls
Eliche Radice
Two-bladed propeller rep. Sail Drive Ø 380 mm - 15 "(Pitch 8 to 12)
€964.43
Sail Drive SDF folding two-bladed propellers. Propellers made with an aluminum / magnesium alloy, coated with epoxy paint. They have a rubber shock absorber hub. They are intended for sailboats, catamarans, displacement hulls
ATMB Marine
Water hose inside Ø 20 x 24 mm per ml
€4.66
Smooth PVC pipe with food-grade metal turns. For on-board water circuit and engine cooling supply and bilge pumps. This hose is very flexible and robust. It is made of translucent or white PVC with a metallic coil. Service temperature -10 to + 60 ° C. Operating pressure 10 bar
Norma
Stainless steel clamps Norma W4 80-100 band 9 mm
€3.88
W4 stainless steel clamps "NORMACLAMP": the band is full and the clamping system and the screw are made of corrosion-resistant stainless steel. These premium collars are designed for mounting above and below the waterline for tightening all the pipes on board. It is necessary to double the collars on the water and diesel circuits and more particularly on the connections below the waterline
Eliche Radice
Fixed propeller 4 blades B Ø 530 mm - 21 "- (Pitch 16 to 20)
€1,365.26
Propeller 4 blades type B surface 68%. The propellers of our production are made with care in shell molds. This allows to obtain homogeneous thicknesses and a strict similarity of execution. Automated machining guarantees precise assembly. All of our propellers are dynamically balanced to ensure vibration-free operation. Our propellers guarantee the best performance of the engine as well as a very good longevity
ATMB Marine
Stainless steel shaft Ø 25 length 1000 mm
€136.67
The shafts are made of high-strength V174 stainless steel. This alloy provides a resistance of 110 kg / mm². They are machined on the propeller side and supplied with a key according to the European standard taper 1 / 10th and are cylindrical on the engine side. We can tailor dimensions different from those described. They are resistant to oxidation and offer excellent mechanical resistance. Available in 316L stainless steel - V174 and TEMET25
ATMB Marine
Sanitary hose inside Ø 19 mm per ml
€4.27
Opaque white PVC hose, special anti-odor, for on-board sanitary circuits. Smooth white interior reinforced with a PVC turn. Temperature -15 to + 60 ° C. Operating pressure 7 bar

This range is approved by LLOYDS and Bureau Véritas